For the hydraulic punching press to operate in the best condition for a long time, it should be maintained properly. But how do you maintain these machines? Well, there are several ways that you can go about it to get it right. For starters, this guide is for you. We have put together some of the best ways that you can maintain your hydraulic punching press. Check out the following tips:
Changing Hydraulic Oil
Most hydraulic systems use oil for the production of the compression force. For the machine to operate more efficiently, you need to ensure that the oil is maintained in good condition, and one of the ways is ensuring that it is changed as often as possible. You should not operate with damaged oil. You can lab tests on the hydraulic oil or have an expert check on it and recommend a change.
The hydraulic punching press has many moving parts depending on the complexity of the design and setup. You need to ensure that these parts are properly lubricated for the machine to operate efficiently. Without proper lubrication, your machine will be prone to friction wear, which can be very damaging to the machine. Use the right lubrication oil as recommended by the manufacturer or an expert.
Checking Pressure Gauges
The amount of pressure produced by the hydraulic punching press is another performance factor when maintaining these machines. You must ensure that you are producing the right pressure to avoid damaging the machine. If the pressure is not enough, then your pressing operations will be hampered. So, make sure that the pressure gauges are operating accurately.
Clean the Machine
The other tip for maintaining a hydraulic punching press is keeping it clean. Depending on the conditions you are working in, the machine can accumulate a lot of dirt and dust. Dirt and dust can increase the rate of wear and tear. It can also reduce the efficiency of operating the machine. That’s why it is important to ensure the machine is kept clean. Clean it regularly by wiping off dirt and dust.
Check For Loose Screws and Nuts
During the pressing activities, the machine can produce some vibrations and movements that can cause loose screws and nuts. Therefore, you need to consider checking these parts to keep the machine running smoothly. Lose nuts and screws usually causes a noisy hydraulic punching press.