Importance Of Machine Quality in Laser Engraving Cylinder

Beginner Guide On Gravure Cylinder Engraving

Beginner Guide On Gravure Cylinder Engraving

Are you planning to do gravure cylinder engraving for the first time? Well, this one of the easier engraving tasks, but you need to get a few things right. You need to understand the basic technical aspects of laser and electronic engraving. If you are a beginner, this guide is for you.

We have put together some of the things that you need to get right when engraving a gravure cylinder. These are basic steps that will help do both simple and complex cylinder engravings. Check out the following:

Get The Right Machine

The first step is getting the right machine for the type of gravure cylinder you want to engrave. Start with analyzing the kind of engraving you want to do, including the size of the cylinders. A good machine should be able to handle all the sizes of gravure cylinders that you will be engraving. This is a very important factor to consider as it can affect the effectiveness of the machine as well as the cost of engraving.

Gravure Cylinder Materials

The most important thing about the gravure cylinder material is the outer layer. This is the layer that may come into contact with the laser beam. There is a range of materials used for the making of the gravure cylinder. For the laser engraving cylinder, the material must metal and not just any other metal but steel. With the best steel alloy material, you have a longer lifespan because it can withstand the laser beam’s heat.

Get A Good Software

It is important that you get the issue of the software correct. There are so many software products in the market, but you need a program that is versatile in use. It must be among the latest and also easy to use. We highly recommend the use of software that enables the conversion of the scanned image and turns it into a digital image. They eliminated the need for an image designed. So, get the advanced and easy-to-use engraving software.

Understand How The Machine Works

The other thing you need to know to engrave a gravure cylinder is understanding how the machine works. You cannot do the proper engraving if you don’t understand how the machine works. Start from the basics by reading the manual step by step. But if you are very new, you need to hire an expert to train you. Proper understanding of the machine increase quality and reduces accidents and waste.